4EVAC IMPACT 사용자 설명서 - 페이지 5

{카테고리_이름} 4EVAC IMPACT에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 4EVAC IMPACT 14 페이지. Controller
4EVAC IMPACT에 대해서도 마찬가지입니다: 참조 매뉴얼 (8 페이지)

Hacousto Holland bv

Industrieweg 87

2651BC Berkel & Rodenrijs

CONTROLLER user manual

YELLOW blinking

NETWORK FAULT

Indicates when any device or link in the network is missing.

OFF

YELLOW continuous

YELLOW blinking slow

Press to mute the sound of the buzzer in the entire system.

Press to verify visual (LEDs) and audible indications (buzzer) of the front panel of the local Controller and

local amplifiers (connected to AMP LINK of local Controller).

Press to trigger the EVAC message in all zones in the entire system.

Press to trigger the ALERT message in all zones in the entire system.

Press to reboot the system. In a network system this will reboot the entire network.

NOTE: Applying RESET will re-initiate AMP LINK and re-assign addresses and settings of amplifiers

connected to the AMP LINK, according to the configuration settings of the Controller. Addressing of the

amplifiers follows the order of the AMP LINK physical connection (see chapter "AMP LINK").

Author:

SD card fault

Config file not compatible

Wrong ID setting

Network OK

At least one device from the network is missing.

Global ring is broken (any place in the ring)

Page 5 of 14