4EVAC IMPACT Podręcznik użytkownika - Strona 5
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt bezpieczeństwa 4EVAC IMPACT. 4EVAC IMPACT 14 stron. Controller
Również dla 4EVAC IMPACT: Podręcznik referencyjny (8 strony)
Drukuj stronę
Hacousto Holland bv
Industrieweg 87
2651BC Berkel & Rodenrijs
CONTROLLER user manual
YELLOW blinking
NETWORK FAULT
Indicates when any device or link in the network is missing.
OFF
YELLOW continuous
YELLOW blinking slow
3. Front buttons
SILENCE
Press to mute the sound of the buzzer in the entire system.
LAMP TEST
Press to verify visual (LEDs) and audible indications (buzzer) of the front panel of the local Controller and
local amplifiers (connected to AMP LINK of local Controller).
EVAC
Press to trigger the EVAC message in all zones in the entire system.
ALERT
Press to trigger the ALERT message in all zones in the entire system.
RESET
Press to reboot the system. In a network system this will reboot the entire network.
NOTE: Applying RESET will re-initiate AMP LINK and re-assign addresses and settings of amplifiers
connected to the AMP LINK, according to the configuration settings of the Controller. Addressing of the
amplifiers follows the order of the AMP LINK physical connection (see chapter "AMP LINK").
Author:
o
SD card fault
o
Config file not compatible
o
Wrong ID setting
Network OK
At least one device from the network is missing.
Global ring is broken (any place in the ring)
Page 5 of 14
DD