Apperson Datalink 3000 사용자 설명서 - 페이지 11

{카테고리_이름} Apperson Datalink 3000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Apperson Datalink 3000 16 페이지. Scanner apperson datalink 3000

Clean My Scanner

It is recommended that you clean your scanner at least 3 times per year or before

any high volume scanning projects. We suggest using compressed air to clean

the scanner and sensors. You may access the sensors by lifting the top portion of

the scanner up (figure 5). You will see 21 mini slots (figure 6) all containing read

sensors. Gently spray across the 21 slots to clear any residual paper dust. Note:

Always calibrate your scanner after cleaning.

If you continuously press the "Summary Display" button on your scanner, you will

receive the following information in this order:

1. Scanner serial number and firmware version number

2. Barcode firmware version

3. Total number of sheets scanned

4. Total number of scanned sheets since last calibrated

5. Total number of scanned sheets since maintenance was last performed

If you are experiencing inconsistent operation or irregularities with your scanner, try

re-calibrating the scanner using the calibration sheet provided with the machine. In

many cases a simple calibration will resolve the problem.

Use the following guide to troubleshoot basic operational problems that you have

encountered. If you are unable to resolve the problem or have service questions,

please call the number below and ask for Technical Support.

Figure 5

For Service and Repair, call

800.827.9219

Figure 6