Apperson Datalink 3000 Podręcznik użytkownika - Strona 11
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Skaner Apperson Datalink 3000. Apperson Datalink 3000 16 stron. Scanner apperson datalink 3000
Drukuj stronęClean My Scanner
It is recommended that you clean your scanner at least 3 times per year or before
any high volume scanning projects. We suggest using compressed air to clean
the scanner and sensors. You may access the sensors by lifting the top portion of
the scanner up (figure 5). You will see 21 mini slots (figure 6) all containing read
sensors. Gently spray across the 21 slots to clear any residual paper dust. Note:
Always calibrate your scanner after cleaning.
Summary Display:
If you continuously press the "Summary Display" button on your scanner, you will
receive the following information in this order:
1. Scanner serial number and firmware version number
2. Barcode firmware version
3. Total number of sheets scanned
4. Total number of scanned sheets since last calibrated
5. Total number of scanned sheets since maintenance was last performed
Troubleshooting:
If you are experiencing inconsistent operation or irregularities with your scanner, try
re-calibrating the scanner using the calibration sheet provided with the machine. In
many cases a simple calibration will resolve the problem.
Use the following guide to troubleshoot basic operational problems that you have
encountered. If you are unable to resolve the problem or have service questions,
please call the number below and ask for Technical Support.
Figure 5
For Service and Repair, call
800.827.9219
9
Figure 6