Data Signs PTL S1 운영 및 유지보수 매뉴얼

{카테고리_이름} Data Signs PTL S1에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Data Signs PTL S1 10 페이지.

Operations and Maintenance Manual

PTL-TYPE-1 mode of operation (remote controlled only)

This Portable Traffic Lights is a lightweight traffic light. As such correct operation for

Set-up and Take-down procedure is essential. Please ensure this manual is read and

understood before attempting to operate the Data Signs' Portable Traffic Lights (PTL).

Set-up and Maintenance requirements of the PTL are covered by this Manual.

10:14am

PTL PTLSG

EXIT

STOP

Shut Down

Remote

Battery

Showing optional Ballasts.

Ballasts are mandatory for QLD.

Showing optional

target board.

Target boards are

mandatory for NSW.

P T L - S 1 O P E R A T I O N S M A N U A L

UNCONTROLLED WHEN PRINTED

CAUTION:

The Data Sign Portable Traffic Lights should

only be operated by qualified traffic managers.

If you have hired out this PTL, contact the Hire

Company for assistance.

The PTL-S1™ is used to control localized vehicular

traffic flow as a safer substitute for STOP/SLOW

(lollipop) signs.

It is powered by a LiPo maintenance free battery

that needs to be recharged at the end of the day.

It is not intended to be left unattended on site and

can only be operated via the Remote Control which

places a safe distance between the actual Traffic

Light and the operator.

An overview of the layout of the PTL-S1™

equipment is provided here.

MAN 0011F Issue 1

Rev: 12/02/2024