Data Signs PTL S1 Руководство по эксплуатации и техническому обслуживанию
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Оборудование для обеспечения безопасности Data Signs PTL S1. Data Signs PTL S1 10 страниц.
Печатать страницуOperations and Maintenance Manual
PTL-TYPE-1 mode of operation (remote controlled only)
This Portable Traffic Lights is a lightweight traffic light. As such correct operation for
Set-up and Take-down procedure is essential. Please ensure this manual is read and
understood before attempting to operate the Data Signs' Portable Traffic Lights (PTL).
Set-up and Maintenance requirements of the PTL are covered by this Manual.
10:14am
4G
PTL PTLSG
EXIT
STOP
GO
Shut Down
MENU
Remote
Battery
Showing optional Ballasts.
Ballasts are mandatory for QLD.
© 2024 Data Signs Pty Ltd. All rights reserved
Showing optional
target board.
Target boards are
mandatory for NSW.
P T L - S 1 O P E R A T I O N S M A N U A L
|
UNCONTROLLED WHEN PRINTED
CAUTION:
The Data Sign Portable Traffic Lights should
only be operated by qualified traffic managers.
If you have hired out this PTL, contact the Hire
Company for assistance.
The PTL-S1™ is used to control localized vehicular
traffic flow as a safer substitute for STOP/SLOW
(lollipop) signs.
It is powered by a LiPo maintenance free battery
that needs to be recharged at the end of the day.
It is not intended to be left unattended on site and
can only be operated via the Remote Control which
places a safe distance between the actual Traffic
Light and the operator.
An overview of the layout of the PTL-S1™
equipment is provided here.
|
MAN 0011F Issue 1
|
Rev: 12/02/2024
1