DURKOPP ADLER H867 추가 지침 - 페이지 8
{카테고리_이름} DURKOPP ADLER H867에 대한 추가 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DURKOPP ADLER H867 12 페이지. Tilting support
페이지 인쇄
3
Fig. 4: Installation I
(1) - Adjusting screws
(2) - Bolt
Handling step
1. Loosen the adjusting screws (1).
2. Pull out the bolt (2) on the lever (3).
Fig. 5: Installation II
(4) - Screws
(5) - Holder
Handling step
1. Set the machine to the working position.
2. Screw the holder (5) into the table top using the screws (4).
3. Screw the holder (6) into the base plate using the screws (7).
6
Installing the parts set
WARNING
Risk of crushing due to the weight of the machine!
Secure the machine against tipping during installation.
Installation of the tilting support by qualified techni-
cians ONLY!
Switch off the machine prior to installation.
①
④
⑤
Installing the parts set
③
②
(3) - Lever
(6) - Holder
(7) - Screws
Additional Instructions H867 - 00.0 - 03/2015
⑥
⑦
⑥