DURKOPP ADLER 550-867 추가 지침 - 페이지 16
{카테고리_이름} DURKOPP ADLER 550-867에 대한 추가 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DURKOPP ADLER 550-867 20 페이지. Btsr sensor
페이지 인쇄
5.3 Fitting the thread clamp
Abb. 18: Fitting the thread clamp
1. Insert the thread clamp (1) ensuring that the edge (4) of the thread
2. Tighten the screw (2).
Abb. 19: Attaching the sticker
Attaching the threading procedure
1. Remove the white protective film from the sticker (3).
2. Place the sticker (3) into position.
3. Press down on the sticker (3) so it is firm.
4. Carefully remove the transparent mounting film.
14
(1) - Thread clamp
clamp is parallel to the edge (4) of the BTSR sensor.
③
(2) - Screw
(3) - Sticker
(4) - Edges, parallel
Additional Instructions 550-867 - 01.0 - 08/2017
Fitting the new parts
①
②
④