DURKOPP ADLER 550-867 Ek Talimatlar - Sayfa 16

Tarayıcı DURKOPP ADLER 550-867 için çevrimiçi göz atın veya pdf Ek Talimatlar indirin. DURKOPP ADLER 550-867 20 sayfaları. Btsr sensor

5.3 Fitting the thread clamp

Abb. 18: Fitting the thread clamp

1. Insert the thread clamp (1) ensuring that the edge (4) of the thread

2. Tighten the screw (2).

Abb. 19: Attaching the sticker

Attaching the threading procedure

1. Remove the white protective film from the sticker (3).

2. Place the sticker (3) into position.

3. Press down on the sticker (3) so it is firm.

4. Carefully remove the transparent mounting film.

(1) - Thread clamp

clamp is parallel to the edge (4) of the BTSR sensor.

③

(2) - Screw

(3) - Sticker

(4) - Edges, parallel

Additional Instructions 550-867 - 01.0 - 08/2017

Fitting the new parts

①

②

④