Data-Tronix DT-IPTV-QAM-ASI-4HC 사용자 설명서 - 페이지 14
{카테고리_이름} Data-Tronix DT-IPTV-QAM-ASI-4HC에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Data-Tronix DT-IPTV-QAM-ASI-4HC 17 페이지. 4-input independent output allocation encoder-modulator with asi.
페이지 인쇄ASI Control:
The DT-IPTV-QAM-ASI-4HC offers the integrator a MPTS ASI output stream.
1. Modify the ASI TS_ID as required.
2. Remove/Add ASI streams as required.
3. Select Save and Confirm to save all modified parameters.
Disable RF/QAM
The DT-IPTV-QAM-ASI-4HC offers the integrator the ability to disable a RF QAM.
To disable a RF (QAM) output, "uncheck" the checkbox associated with the RF QAM.
Application Notes
When installing more than 1 device into a system, each device must have a unique RF TS_ID and ASI TS_ID.
We highly recommend you save your encoder configuration files.
Note: See Administration tab for how to backup device settings.
Network Configuration
Management IP Setup:
Network Setup Page of DT-IPTV-QAM-ASI-4HC
Use the Network Setup to configure the device's Management Port's IP address (GUI address) of the device, Subnet Mask,
Gateway, Enable/Disable DHCP, and set Host Name.
Save and Confirm: Once all parameters are set remember to Save and confirm all changes.
DT-IPTV-QAM-ASI-4HC |
14
Manual V1.0 | 01152019