Data-Tronix DT-IPTV-QAM-ASI-4HC 사용자 설명서 - 페이지 16

{카테고리_이름} Data-Tronix DT-IPTV-QAM-ASI-4HC에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Data-Tronix DT-IPTV-QAM-ASI-4HC 17 페이지. 4-input independent output allocation encoder-modulator with asi.

페이지 인쇄

Restore/Upload saved file configurations:

1. Select Administration.

2. Select "Choose file" menu.

3. Locate the required file to be imported.

4. Select "Upload" to import the selected file into the device.

5. Remember to save and backup any and all changes.

Change Password:

Use the Change Password section to change or modify the device's password as desired.

Save and Confirm new password.

Private Address Ranges, IPv4

Private IPv4 addresses are addresses set aside by the IANA (Internet Assigned Numbers Authority) for use within networks

that will not directly communicate or not be seen by the internet. These private addresses cannot be used on the Internet or be

used to communicate with the Internet. ISP's filter out and delete packets using private IP addresses. Any organization that

uses private IP addresses on devices that communicate with the internet must use a device that performs Network Address

Translation.

Anyone can use private addresses and they are not required to seek permission to use them. Again, networks using private IP

addresses cannot communicate directly with the internet.

There are three blocks of addresses that are set aside by IANA for use in private internets and are not publicly routable on the

global internet:

Private Class A Range: 10.0.0.0

Private Class B Range: 172.16.0.0

Private Class C Range: 192.168.0.0

It is important to note that only some of the 172.xx.xx.xx and the 192.xx.xx.xx address ranges are designated for private use.

The remaining addresses are public and can be routable via the global Internet.

More information regarding private addresses can be found at http://www.iana.org and https://www.arin.net

10.255.255.255

172.31.255.255

192.168.255.255

DT-IPTV-QAM-ASI-4HC |

Manual V1.0 | 01152019