Duronic FH15K 매뉴얼 - 페이지 7

{카테고리_이름} Duronic FH15K에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duronic FH15K 11 페이지.

TURNING THE HEATER OFF

To switch the heater off completely, press the Power/Standby button. Then

turn off the power switch on the bottom of the heater.

The timer can be programmed for 1, 2, 4, 8 or 15 hours. It can be used with

either of the two heat settings.

To set the timer, press the Timer button. The Timer button will light up and

by default it will run for 1 hour. To set the timer to your desired time, press the

Timer button repeatedly until you've reached the time setting you require.

When the temperature of the heater is too high due to an abnormality in

the use environment or due to improper use, the thermostat device will

automatically cut off the power and make the heater stop working.

After the heater has cooled down completely, check what the reason for

overheating may have been and rectify the problem. If it was obstruction,

remove the item covering the heater. After this, the heater can continue being

used as normal.

Tip: The most common cause of overheating is often due to deposits of dust

or fluff entering the heater vents. To avoid this happening, ensure that you dust

or vacuum the air vents and front grill regularly.

If the whole heater is tipped over by accident, the safety system will

automatically cut off the power. Once the heater has been placed in an upright

position again, the heater can continue to be used as normal.

• Take care when handling a heater as it may still be hot to touch.

• If the heater has tipped over, check the heater, plug and cable for

any visible damage. If it is damaged, do not use the heater.

Tip Over Protection