DataCard SP75 Plus 빠른 설치 매뉴얼 - 페이지 5

{카테고리_이름} DataCard SP75 Plus에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DataCard SP75 Plus 8 페이지. Color ribbons, duragard laminates and topcoats
DataCard SP75 Plus에 대해서도 마찬가지입니다: 데이터시트 (2 페이지), 데이터시트 (2 페이지), 보충 설명서 (2 페이지), 사양 (1 페이지), 브로셔 (5 페이지), 브로셔 및 사양 (4 페이지), 보충 설명서 (2 페이지), 사양 (2 페이지), 보충 설명서 (2 페이지), 빠른 설치 매뉴얼 (12 페이지)

페이지 인쇄

Connect the printer to the network

using an Ethernet cable.

Use the printer LCD panel to set the IP address

mode—DHCP or Static IP. Set the IP address if

needed. The printer restarts if you changed settings.

Retrieve the IP address

and record it.

IP Address:

Insert the Smart Driver CD-ROM.

Click "Install the Printer" after the

window opens. Choose "Direct

Network" during installation.

Set the printer IP address in the driver's Properties\ Ports\

Configure or Properties\ Details\ Port Settings dialog box.

Open the Printing Preferences (Windows 2000 and XP), Properties (Windows

98 and Me), or Default Document Properties (Windows NT) dialog box and

change the laminator "Apply Material" settings to match the supplies loaded in

the printer. Change other settings if needed.

Open the Printer Toolbox when

Congratulations,

Printing Preferences, Properties,

you have installed the

or Document Default Properties

printer! Complete the

opens. Click "Print Sample Card"

installation report

on the Printer Toolbox.

and install your ID

Compare your card with the

software now.

factory card.

SP75 Quick Install Guide

Page 5