DataCard SP75 Plus 빠른 설치 매뉴얼 - 페이지 6

{카테고리_이름} DataCard SP75 Plus에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DataCard SP75 Plus 8 페이지. Color ribbons, duragard laminates and topcoats
DataCard SP75 Plus에 대해서도 마찬가지입니다: 데이터시트 (2 페이지), 데이터시트 (2 페이지), 보충 설명서 (2 페이지), 사양 (1 페이지), 브로셔 (5 페이지), 브로셔 및 사양 (4 페이지), 보충 설명서 (2 페이지), 사양 (2 페이지), 보충 설명서 (2 페이지), 빠른 설치 매뉴얼 (12 페이지)

페이지 인쇄

Connect the print server to the

network using an Ethernet cable.

Use HP Web Jetadmin® to set up the print server on the network.

See print server documentation for information. Continue when the

print server is identified to the network (can take up to 20 minutes).

Set the printer IP address in the driver's Properties\Ports\

Configure or Properties\Details\Port Settings dialog box.

Open the Printing Preferences (Windows 2000 and XP), Properties

(Windows 98 and Me), or Default Document Properties (Windows NT)

dialog box and change the laminator "Apply Material" settings to match

the supplies loaded in the printer. Change other settings if needed.

Open the Printer Toolbox when

Printing Preferences, Properties,

or Document Default Properties

opens. Click "Print Sample Card"

on the Printer Toolbox.

Compare your card with the

factory card.

Page 6

Configure the print server for your network. Obtain the settings,

including the print server IP address or network name, from

your network personnel.

IP Address:

a Connect the printer to the print server using a

USB cable. See Step 1.

b Insert the Smart Driver CD-ROM.

c Click "Install the Printer" after the window opens.

Choose "DIrect Network" during installation.

Congratulations,

you have installed the

printer! Complete the

installation report

and install your ID

software now.