DataCard SD460 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} DataCard SD460에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DataCard SD460 7 페이지. For printers using the datacard xps card printer driver, usb and network
DataCard SD460에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (16 페이지), 빠른 설치 매뉴얼 (10 페이지), 빠른 설치 매뉴얼 (8 페이지)

페이지 인쇄

DATACARD

Following the instructions of the Quick Install Guide, the installer should expect to unpack,

install, test and conduct basic operator training in less than an hour. The SD460 system is easy

to install using the visual step-by-step installation guide.

The product specifications are contained in the SD460 system data sheet located on

PartnerPage

. Some key information that may be helpful for installation is contained below:

 Dimensions/Weights:

Dimensions:

o Single/Dual Laminator 23.2 in. x 10.6 in. x 20.2 in. (589 mm x 270 mm x 513

mm)

o Laminator w/ Tactile 26.2 in x 10.6 in. x 20.2 in. (675 mm x 270 mm x 513

mm)

Weight:

o Single Laminator 29.92 lbs (13.6 kg)

o Dual Laminator 32.78 lbs (14.9 kg)

o Laminator w/ Tactile 36.96 lbs (16.8 kg)

 Input voltage: 100V – 240V, 50-60 Hz

 Power cables – Power cables are supplied with the printer

Technical Training

Printer Maintenance Course

Two maintenance courses are required for the SD460 printer – TE1524 and TE1157. The

SD/CD series printer maintenance training class (TE1524) provides the knowledge necessary to

install, operate, maintain and troubleshoot the SD/CD Series card printers including the SD460

printer. For customers ordering an SD460 printer, TE1157 which focuses on the laminator is

also required. To request this printer maintenance training, please contact the Technical

Education department through PartnerPage

[email protected]. Please refer to course descriptions, day schedules and the training schedule

posted on PartnerPage

SD/CD Series Card Printer Maintenance Training – TE1524

Course Identifier

Intended Audience

Course Length

Delivery

Prerequisites

Recommended Skill set

SERVICE ANNOUNCEMENT

at www.partnerpage.com or email

for up-to-date information.

TE1524

Datacard Group customer engineers, channel partners or repair technicians

responsible for the installation, operation, and maintenance of the CD/SD Series

printer.

The entire course is approximately 14 hours.

The self-study course is available online and on DVD. Slides with narration and

video clips are used to present material including removal/replacement procedure

for all components.

Online: Enroll online by logging onto PartnerPage

PrintersSD460Online Course and select „Register Now‟

DVD: Order part number 539946-001

Students must have access to an SD460 printer, a basic tool kit, and a PC with

speakers.

General knowledge of the plastic card industry, a general understanding of

networks, working knowledge of computers and Windows OS. Must possess a

TrainingDesktop Card