4IPNET EAP260 빠른 설치 매뉴얼 - 페이지 6

{카테고리_이름} 4IPNET EAP260에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 4IPNET EAP260 15 페이지. Enterprise access point

페이지 인쇄

System Overview

Front Panel

WES button

Power LED

Status LED

Wireless LED

Uplink LED

LAN1 - 4 LED

USB LED

WES LED

Figure 1 EAP260 Front Panel

Press and hold for 5 seconds to initiate Master WES process. Press and

release to initiate Slave WES process.

On indicates power on.

On indicates the system is ready.

On indicates wireless network interface is ready for service.

On indicates the Uplink is connected.

Indicates the connection status of each LAN.

Indicates the status of USB connection. The USB port is reserved for future

use.

For indicating WDS connection status.

WES Start

WES Negotiate

WES Timeout

WES Success

WES Fail

EAP260 Enterprise Access Point

Master (Press for more than

3 seconds)

LED (Green) OFF and then

BLINKING SLOWLY

BLINKING NORMALLY

(Green)

LED (Green) ON

LED (Red) ON

LED (Green) ON

Quick Installation Guide

ENGLISH

Slave (Press once and

then release right away)

LED (Red) OFF and then

BLINKING SLOWLY

BLINKING NORMALLY

(Red)

LED (Red) ON

LED (Green) ON

LED (Red) ON