4IPNET EAP260 Quick Installation Manual - Page 6

Browse online or download pdf Quick Installation Manual for Wireless Access Point 4IPNET EAP260. 4IPNET EAP260 15 pages. Enterprise access point

Print Page

System Overview

Front Panel
1
WES button
2
Power LED
3
Status LED
4
Wireless LED
5
Uplink LED
6
LAN1 - 4 LED
7
USB LED
8
WES LED
Copyright © 4IPNET, INC. All rights reserved.
Figure 1 EAP260 Front Panel
Press and hold for 5 seconds to initiate Master WES process. Press and
release to initiate Slave WES process.
On indicates power on.
On indicates the system is ready.
On indicates wireless network interface is ready for service.
On indicates the Uplink is connected.
Indicates the connection status of each LAN.
Indicates the status of USB connection. The USB port is reserved for future
use.
For indicating WDS connection status.
WES Start
WES Negotiate
WES Timeout
WES Success
WES Fail
2
EAP260 Enterprise Access Point
Master (Press for more than
3 seconds)
LED (Green) OFF and then
BLINKING SLOWLY
BLINKING NORMALLY
(Green)
LED (Green) ON
LED (Red) ON
LED (Green) ON
Quick Installation Guide
Quick Installation Guide
Quick Installation Guide
Quick Installation Guide
ENGLISH
Slave (Press once and
then release right away)
LED (Red) OFF and then
BLINKING SLOWLY
BLINKING NORMALLY
(Red)
LED (Red) ON
LED (Green) ON
LED (Red) ON