4IPNET EAP701 빠른 설치 매뉴얼 - 페이지 9

{카테고리_이름} 4IPNET EAP701에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 4IPNET EAP701 18 페이지. Enterprise access point

Step 2. Connect one end of the Ethernet cable to the Uplink port and the other end of the cable to a switch,

a router, or a hub; Or use the 110 punchdown block as your uplink connection. The 110 punchdown

block may be connected with the following pin assignment:

Orange

White Orange

Brown

White Brown

The EAP701 is now connected to your existing wired LAN network.

Step 3. There are three ways to supply power to EAP701

a) Connect the DC power adaptor to the power jack socket.

b) The Uplink port is capable of receiving PoE. Connect an IEEE 802.3af-compliant PSE device

(e.g. a PoE-switch) to the Uplink port of EAP701 with the Ethernet cable.

c) Use a standard 110 punchdown tool to punch copper wires onto the punchdown block (pin

assignment 568A)

Step 4. Fasten the Access Point to the mounting plate

a) Align the Access Point to the mounting plate using the arrow printed on the back of the Access

Point.

Blue

White Blue

Green

White Green

Quick Installation Guide

EAP701 Enterprise Access Point

ENGLISH