4IPNET EAP701 Hızlı Kurulum Kılavuzu - Sayfa 9
Kablosuz Erişim Noktası 4IPNET EAP701 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. 4IPNET EAP701 18 sayfaları. Enterprise access point
Sayfayı Yazdır
Step 2. Connect one end of the Ethernet cable to the Uplink port and the other end of the cable to a switch,
a router, or a hub; Or use the 110 punchdown block as your uplink connection. The 110 punchdown
block may be connected with the following pin assignment:
Orange
White Orange
Brown
White Brown
The EAP701 is now connected to your existing wired LAN network.
Step 3. There are three ways to supply power to EAP701
a) Connect the DC power adaptor to the power jack socket.
b) The Uplink port is capable of receiving PoE. Connect an IEEE 802.3af-compliant PSE device
(e.g. a PoE-switch) to the Uplink port of EAP701 with the Ethernet cable.
c) Use a standard 110 punchdown tool to punch copper wires onto the punchdown block (pin
assignment 568A)
Step 4. Fasten the Access Point to the mounting plate
a) Align the Access Point to the mounting plate using the arrow printed on the back of the Access
Point.
Copyright © 4IPNET, INC. All rights reserved.
Blue
White Blue
Green
White Green
5
Quick Installation Guide
EAP701 Enterprise Access Point
ENGLISH