Durr Dental VISTACAM2 설치 및 운영 지침 매뉴얼 - 페이지 11

{카테고리_이름} Durr Dental VISTACAM2에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Durr Dental VISTACAM2 13 페이지.

8. COMMISSIONING

Before using for the first time check set-up

and all cables carefully.

• Switch on power at the VistaCam2.

• Switch on lighting. Yellow LED shows.

• Image viewer appliance should be switched

on.

• The appliance is now operational and an

image should be seen in the image viewing

appliance.

This appliance was checked before transport

that it satisfied all electrical safety

requirements. As part of the commissioning

procedure electrical testing should be carried

out and documented. Furthermore, electrical

checks should be carried out at regular

intervals in line with national regulations.

9. TRANSPORT OF THE

VISTACAM 2

If the VistaCam 2 is transported from one

treatment room to another the camera can be

uncoupled from the Docking-Station without

being switched off. After replacing in the

Docking-Station however, the camera must be

switched on again.

The electronic board and components should

be disposed of as electronic waste. The other

elements can be disposed of as normal waste

observing local rules and regulations.