Durr Dental VISTACAM2 Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 11

Dişçilik ekipmanları Durr Dental VISTACAM2 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. Durr Dental VISTACAM2 13 sayfaları.

Sayfayı Yazdır

8. COMMISSIONING

8.1 Function check

Before using for the first time check set-up

and all cables carefully.

• Switch on power at the VistaCam2.

• Switch on lighting. Yellow LED shows.

• Image viewer appliance should be switched

on.

• The appliance is now operational and an

image should be seen in the image viewing

appliance.

8.2 Test

This appliance was checked before transport

that it satisfied all electrical safety

requirements. As part of the commissioning

procedure electrical testing should be carried

out and documented. Furthermore, electrical

checks should be carried out at regular

intervals in line with national regulations.

9. TRANSPORT OF THE

VISTACAM 2

If the VistaCam 2 is transported from one

treatment room to another the camera can be

uncoupled from the Docking-Station without

being switched off. After replacing in the

Docking-Station however, the camera must be

switched on again.

WASTE DISPOSAL

10. APPLIANCE DISPOSAL

The electronic board and components should

be disposed of as electronic waste. The other

elements can be disposed of as normal waste

observing local rules and regulations.