DataComm Cable Trench System CT-75-2P 지침/설치 시트

{카테고리_이름} DataComm Cable Trench System CT-75-2P에 대한 지침/설치 시트을 온라인으로 검색하거나 PDF를 다운로드하세요. DataComm Cable Trench System CT-75-2P 2 페이지.

Instruction / Installation Sheet

Cable Trench System

Part # CT-75-2P

Parts Included:

● (3) 15 in. Stackable Enclosure Box

● (1) 15 in. Stackable Enclosure Box w/ Open End Cap

● (1) 15 in. Stackable Enclosure Box w/ knockout End Cap

● (4) 15" Gangable Solid Cover

● (1) 15" Cover w/ Cable Pass-Through

Parts Identification:

A- (3) 15 in. Stackable Enclosure Box

B- (1) 15 in. Stackable Enclosure Box w/ Open End Cap

C- (1) 15 in. Stackable Enclosure Box w/ knockout End Cap

D- (4) 15 in. Gangable Solid Cover

E- (1) 15 in. Cover w/ Cable Pass-Through

F- (2) Screw Cover End Caps

G- (20) Screw Cover Screws

H- (36) Box Screws

Installation Instructions:

1. Preparing the Wall

Cut out a space in the dry wall 75in. tall (or increments of 15in.) x 15 in wide.

2. Placing the Bottom Box

Place the Stackable Enclosure Box w/ knockout End Cap (C) between studs where the cables are intended to exit the trench.

3. Installing the Bottom Box

Secure the two tabs to the studs using Metal Wood screws (not included) and a Phillips head Screwdriver.

Tools Needed:

● Phillips Head Screwdriver

● (10) Metal Wood Screws

Page 1 of 2

DataComm Electronics, Inc.

6349 Peachtree Street

Norcross, GA 30071-1725

888.223.7977

770.662.8205

www.DataCommElectronics.com

06/19/2018