2easy CDV17D 설치 매뉴얼 - 페이지 7

{카테고리_이름} 2easy CDV17D에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 2easy CDV17D 12 페이지. 2-wire intercom system

Instructions for Lock Relay 1 Setting:

Use the DIP switch and PROG button to change the unlock setting.

UNLOCK TYPE

1. Set DIP‐1=ON, DIP‐2=OFF;

2. Press the PROG (Fig 1) button and hold for 3 secs (blue LED on) to activate the setup option:

1) NO relay: press the PROG button one more time.

2) NC relay: press the PROG button and hold for 3s again.

UNLOCK TIME

1. Set DIP‐1=OFF, DIP‐2=ON;

2. Press the PROG (fig 1) button and hold for 3 secs (blue LED on) to activate the setup option:

3. Press the PROG (fig 1) button and hold for the number of seconds req uired (indicted by beeps and

red LED). The time between pressing and releasing the PRGO button is the unlock time.

Note: DIP‐1 and DIP‐2 should reset to the corresponding ad dress code after setting the above.

Fig. 1

-6-

CDV17DS PCB

1 2 3

Prog Button