Elsema GLR2701SS 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} Elsema GLR2701SS에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Elsema GLR2701SS 6 페이지. Receiver with open collector output

Technical Data

Supply Voltage

Current Consumption 7 mA on standby at 12 VDC supply

Receiving Frequency 27.195MHz

Operating Temperature

Sensitivity 1uV (for output to activate)

Decoding System Microcontroller (32-bit word 4.29 x 10^9 codes)

Code Combinations 4,294,967,296

Outputs

Output Transistor Max switching 100mA/40VDC

Connections

Dimensions 88 x 43 x 15mm

Mounting Hole Size 3.97 mm or 5/32"

Mounting Hole Spacing Length 81.28 mm (3.2"), Width 35.56 mm (1.4")

Weight

Useable Transmitters All Elsema Type 27MHz GLT-... series

Useable Operating Range

7.5-28 VDC. Supply lines should be less than 3m long to comply with radio

frequency authorities

-5 to 50°C

Range

GLR2701SS: 1 Open Collector Transistor Output

GLR2702SS: 2 Open Collector Transistor Outputs

GLR2701SS & GLR2702SS: Female connector , the male connector can be

soldered to a printed circuit board (Available from Elsema).

GLR2701SST & GLR2702SST: Five way screw type terminal block

GLR2701SS: 43g

GLR2702SS: 45g

Up to 350m with proper 50 ohms, 27MHz CB-Antenna. Up to 200m with 1m

long antenna wire. Antenna wire should be extended and away from metal.

Ranges assume line-of-sight operation.

1 & 2Channel 27MHz GIGALINK™ Receiver with open collector outputs, GLR2701SS,GLR2702SS

- 3 -

ELSEMA