Elsema GLR2701SS Hızlı Başlangıç Kılavuzu - Sayfa 3
Alıcı Elsema GLR2701SS için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Elsema GLR2701SS 6 sayfaları. Receiver with open collector output
Sayfayı Yazdır
Technical Data
Supply Voltage
Current Consumption 7 mA on standby at 12 VDC supply
Receiving Frequency 27.195MHz
Operating Temperature
Sensitivity 1uV (for output to activate)
Decoding System Microcontroller (32-bit word 4.29 x 10^9 codes)
Code Combinations 4,294,967,296
Outputs
Output Transistor Max switching 100mA/40VDC
Connections
Dimensions 88 x 43 x 15mm
Mounting Hole Size 3.97 mm or 5/32"
Mounting Hole Spacing Length 81.28 mm (3.2"), Width 35.56 mm (1.4")
Weight
Useable Transmitters All Elsema Type 27MHz GLT-... series
Useable Operating Range
7.5-28 VDC. Supply lines should be less than 3m long to comply with radio
frequency authorities
-5 to 50°C
Range
GLR2701SS: 1 Open Collector Transistor Output
GLR2702SS: 2 Open Collector Transistor Outputs
GLR2701SS & GLR2702SS: Female connector , the male connector can be
soldered to a printed circuit board (Available from Elsema).
GLR2701SST & GLR2702SST: Five way screw type terminal block
GLR2701SS: 43g
GLR2702SS: 45g
Up to 350m with proper 50 ohms, 27MHz CB-Antenna. Up to 200m with 1m
long antenna wire. Antenna wire should be extended and away from metal.
Ranges assume line-of-sight operation.
1 & 2Channel 27MHz GIGALINK™ Receiver with open collector outputs, GLR2701SS,GLR2702SS
- 3 -
ELSEMA