Elsema PentaFOB series 사용자 설명서 - 페이지 4

{카테고리_이름} Elsema PentaFOB series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Elsema PentaFOB series 4 페이지. 433mhz remotes with frequency hopping

PentaFOB

Coding the PentaFOB

1. Using the Receiver

2. Using another Remote Control

Coding using the Receiver

1. Check that all switches are "OFF" on the receivers 12-way dip switch

2. Press and hold the program button on the receiver

3. Press the remote button for 2 seconds, receiver LED will flash and then turn Green

4. Release the button on the receiver and the remote

5. Press remote control button to test the receiver output

Deleting Receivers Memory

Short the Code Reset pins on the receiver for 10 seconds. This will delete all the remotes from the

receiver's memory.

Programming Instructions

remotes and receivers can be done in 2 different ways.

433MHz Keyring Remote with Frequency Hopping – PentaFOB

ELSEM A

Series