Elsema PentaFOB series Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Пульт дистанційного керування Elsema PentaFOB series. Elsema PentaFOB series 4 сторінки. 433mhz remotes with frequency hopping

Друкувати сторінку

PentaFOB

Coding the PentaFOB

1. Using the Receiver

2. Using another Remote Control

Coding using the Receiver

1. Check that all switches are "OFF" on the receivers 12-way dip switch

2. Press and hold the program button on the receiver

3. Press the remote button for 2 seconds, receiver LED will flash and then turn Green

4. Release the button on the receiver and the remote

5. Press remote control button to test the receiver output

Deleting Receivers Memory

Short the Code Reset pins on the receiver for 10 seconds. This will delete all the remotes from the

receiver's memory.

Programming Instructions

remotes and receivers can be done in 2 different ways.

433MHz Keyring Remote with Frequency Hopping – PentaFOB

ELSEM A

Series