Elsema MD2010 매뉴얼 - 페이지 3

{카테고리_이름} Elsema MD2010에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Elsema MD2010 6 페이지. Loop detector

Feature

Low sensitivity

1% of loop frequency

Low to medium sensitivity

0.5% of loop frequency

Medium to high sensitivity

0.1% of loop frequency

High sensitivity

0.02% of loop frequency

Boost mode is OFF

Boost mode is On (Active)

Dip Switch settings

Loop Sensitivity (Dip switch 2&3)

Dip switch 2 & 3

"OFF"

Dip switch 2 "ON" & 3

"OFF"

Dip switch 2 "OFF" &

3 "ON"

Dip switch 2 & 3 "ON"

Boost Mode (Dip switch 4)

Dip switch 4 "OFF"

Dip switch 4 "ON

Description

This setting determines the necessary change to the

loop frequency to trigger the detector, as metal passes

across the sensing loop area.

If boost mode is ON the detector will immediately

switch to high sensitivity once activated.

As soon as the vehicle is no longer being detected the

sensitivity reverts back to what has been set on

dipswitch 2 and 3.

This mode is used when the height of the undercarriage

of a vehicle increases as it passes over the sensing loop.

ELSEMA

MD2010