Elsist NEMO 2.0 400 사용자 설명서 - 페이지 3

{카테고리_이름} Elsist NEMO 2.0 400에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Elsist NEMO 2.0 400 11 페이지. Nemo2.0 series single- phase line interactive

페이지 인쇄

NEMO2.0 65 • 80 • 120 • 160 • 200 • 300 • 400

LINE INTERACTIVE

2 – PRODUCT INTRODUCTION

Thanks for having purchased an ups of NEMO2.0 series. The ups is designed to give you maximum

protection and is an easy to use device.

Thanks to its light weight and compact design, it fits perfectly into small working environments. NEMO2.0

series is equipped with the AVR function to stabilize the input voltage. It is also integrated with the DC start

function (Cold start).

Main characteristics:



Full power protection.

Electrical noise suppression, voltage and overvoltage peak suppression, autonomy, are common

requirements to many UPS types. This UPs provides a wider voltage range capability, in addition to the

aforementioned characteristics. Within this wide voltage range, the load is supplied without any support

from the battery. This feature not only protects your computer, but also improve and increases battery

lifetime.



Cold start function (DC Start).

All NEMO2.0 models are equipped with cold start function, which means that even if the power supply is

unplugged, the UPS can be activated simply by pushing the ON / OFF switch and will operated supplied

by the battery.



Autorestart.

Upon returning the Mains, the UPS will restart automatically.



Overload protection.

The internal microprocessor controls the load status in any operating conditions. In the event of overload

or short circuit, your UPS will beep or will automatically turn off to avoid undesired damage to the load.



Modem connection and protection.

Two special connectors RJ45/RJ11, will protect your Modem or your LAN 10Base-T network from any

noise generated by the phone line.



Power Management software.

NEMO2.0 series includes UPSilon software that enables communication between the UPS and a PC. By

connecting the USB port of the UPS to a corresponding PC port, you can either check or do the following:

to control UPS and battery status.

to save vital files during unattended shutdown.

to plan Turn off and Turn on of the UPS for energy saving.

to Log the UPS activities and status for checking them over the time.



All controls are performed and guaranteed by a high reliability microprocessor.



"Green Power" function for energy saving.



Light weight and compact dimensions.

Rev. 02 27 Gennaio 2017

This UPS is specially designed for PCs or similar equipment.