DataLocker DL3 사용자 설명서 - 페이지 2

{카테고리_이름} DataLocker DL3에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DataLocker DL3 7 페이지. With rfid
DataLocker DL3에 대해서도 마찬가지입니다: 설정 매뉴얼 (2 페이지)

Introduction

Congratulations on your purchase of the DataLocker DL3™Encrypted Hard Drive. The DataLocker DL3™ stands alone as the only

external hard drive equipped with a patented, on board, LCD touch screen. This feature allows the user to conveniently perform all

processes directly through the LCD Interface, making it truly 100% platform independent.

Although the DataLocker DL3™ is extremely user friendly, it is recommended that you review this guide to ensure you become fully

acquainted with the DataLocker DL3™ and all its features.

Getting Started

The DataLocker DL3™ has a minimum power requirement of 5 Volts and 1A of current that is drawn from the USB port. The

DataLocker DL3™ utilizes 256 bit AES encryption operating in XTS mode to fully encrypt your drive's contents.

The DataLocker DL3™ comes preformatted with Windows NFTS file system. All major file systems are supported (HFS, NTFS, EXT,

FAT). Please consult your operating system for initialization and formatting instructions.

Setting the Administrative Password

Step 1: Connect the DL3 to your

computer with the included USB

Cable

Step 2: Enter the default

password "000000" and press

the return key.

WARNING: Your password cannot be reset or recovered without losing all the stored data. Make sure you remember your

password.

Step 3: Press the "SETUP" key on

the touch screen. If the "SETUP"

key is not selected within 3

seconds, the DataLocker DL3™

will automatically connect to the

host computer.

Step 4: Press "CHANGE

PASSWORD" and follow the

onscreen instructions. It is

recommended that you use a

combination of both alpha and

numeric characters for your

password.