DataLocker DL3 Manual do utilizador - Página 2

Procurar online ou descarregar pdf Manual do utilizador para Armazenamento DataLocker DL3. DataLocker DL3 7 páginas. With rfid
Também para DataLocker DL3: Manual de configuração (2 páginas)

Imprimir página

Introduction

Congratulations on your purchase of the DataLocker DL3™Encrypted Hard Drive. The DataLocker DL3™ stands alone as the only

external hard drive equipped with a patented, on board, LCD touch screen. This feature allows the user to conveniently perform all

processes directly through the LCD Interface, making it truly 100% platform independent.

Although the DataLocker DL3™ is extremely user friendly, it is recommended that you review this guide to ensure you become fully

acquainted with the DataLocker DL3™ and all its features.

Getting Started

The DataLocker DL3™ has a minimum power requirement of 5 Volts and 1A of current that is drawn from the USB port. The

DataLocker DL3™ utilizes 256 bit AES encryption operating in XTS mode to fully encrypt your drive's contents.

The DataLocker DL3™ comes preformatted with Windows NFTS file system. All major file systems are supported (HFS, NTFS, EXT,

FAT). Please consult your operating system for initialization and formatting instructions.

Section I: Setting Passwords

Setting the Administrative Password

Step 1: Connect the DL3 to your

computer with the included USB

Cable

Step 2: Enter the default

password "000000" and press

the return key.

WARNING: Your password cannot be reset or recovered without losing all the stored data. Make sure you remember your

password.

Step 3: Press the "SETUP" key on

the touch screen. If the "SETUP"

key is not selected within 3

seconds, the DataLocker DL3™

will automatically connect to the

host computer.

Step 4: Press "CHANGE

PASSWORD" and follow the

onscreen instructions. It is

recommended that you use a

combination of both alpha and

numeric characters for your

password.