Elsner 70512 설치 및 조정 - 페이지 8
{카테고리_이름} Elsner 70512에 대한 설치 및 조정을 온라인으로 검색하거나 PDF를 다운로드하세요. Elsner 70512 20 페이지. Multifunctional actuators
페이지 인쇄
If there is a power outage, the system does not work. Therefore, shadings should be
moved to a save position if there are anticipated weather conditions, for example, if
this has not already been done by the automatic function (product protection).
If the power supply is removed, the connected drive switches off. When the power is
restored, the consumer remains switched off until a new movement command is re-
ceived by the actuator.
2.3. Installation
Analogue/digital inputs connector assignment:
KNX S1R-UP: Not assigned!
KNX S1R-B2A-UP: 1: GND | 2: IN1 | 3: GND | 4: IN2
KNX S1R-BA4-UP: 1: GND | 2: IN1 | 3: GND | 4: IN2 | 5: GND | 6: IN3 | 7: GND | 8: IN4
All GND connectors are internally bridged.
Actuators KNX S1R-UP • Version: 27.05.2020 • from software version 4.00, ETS programme version 4.00 •
6
1
Fig. 1: Bus side
1
Analogue/digital inputs connector
(not for KNX S1R-UP)
2
Label field
3
KNX terminal +/-
4
Programming LED and programming
2
button (countersunk)
3
4
Fig. 2: Output side
1
Connector for drive/consumers
(free of potential)
1
Technical changes and errors excepted.
Installation and start-up