Elsner 70512 Kurulum ve Ayarlama - Sayfa 8

Kontrolör Elsner 70512 için çevrimiçi göz atın veya pdf Kurulum ve Ayarlama indirin. Elsner 70512 20 sayfaları. Multifunctional actuators

If there is a power outage, the system does not work. Therefore, shadings should be

moved to a save position if there are anticipated weather conditions, for example, if

this has not already been done by the automatic function (product protection).

If the power supply is removed, the connected drive switches off. When the power is

restored, the consumer remains switched off until a new movement command is re-

ceived by the actuator.

2.3. Installation

Analogue/digital inputs connector assignment:

KNX S1R-UP: Not assigned!

KNX S1R-B2A-UP: 1: GND | 2: IN1 | 3: GND | 4: IN2

KNX S1R-BA4-UP: 1: GND | 2: IN1 | 3: GND | 4: IN2 | 5: GND | 6: IN3 | 7: GND | 8: IN4

All GND connectors are internally bridged.

Actuators KNX S1R-UP • Version: 27.05.2020 • from software version 4.00, ETS programme version 4.00 •

Fig. 1: Bus side

Analogue/digital inputs connector

(not for KNX S1R-UP)

Label field

KNX terminal +/-

Programming LED and programming

button (countersunk)

Fig. 2: Output side

Connector for drive/consumers

(free of potential)

Technical changes and errors excepted.

Installation and start-up