DataLocker Sentry K300 사용자 설명서 - 페이지 9

{카테고리_이름} DataLocker Sentry K300에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DataLocker Sentry K300 19 페이지. Encrypted keypad mssd with oled screen
DataLocker Sentry K300에 대해서도 마찬가지입니다: 배포 매뉴얼 (10 페이지), 검토자 매뉴얼 (10 페이지)

페이지 인쇄

1. Password Reset

– Conﬁrm Ownership of the device: Enter the Windows username and password that is

associated with the login credentials of the computer the device is plugged into.

– Custom Device Information: Required information about you or your device. The

required ﬁelds will vary.

– Unique User Token: This token is directly associated with the end user's account and

will be provided by the System Administrator.

– Administrator Registration Approval: The System Administrator may require their ap-

proval to proceed with device registration.

2. Enter they Sentry K300 password into the client. This is the same password used to unlock the

device and any letters should be entered as capitals.

3. If the Sentry K300 doesn't currently have a ﬁle system, you will be prompted to choose one for

the Secure Volume (see

4. The device will now ﬁnalize the setup process and be ready for use. Access the Encrypted

Storage by clicking the Folder Icon in the top menu. The settings of the device can be

accessed and altered by clicking the Gear Icon. See the

information.

SafeConsole Mode

Once the Sentry K300 is registered to SafeConsole, the Secure Volume can be accessed by following

the steps below:

1. Enter the password into the K300.

2. Select Connect or Read Only Mode using the K300 keypad and physically connect it to your

workstation.

3. Select the option Unlocker.exe inside of the Unlocker partition that can be found in File

Explorer.

4. Click the Unlock button shown on the DataLocker Control Panel.

5. The Secure Volume will be mounted to a separate drive letter on your workstation. The Secure

Volume can also be accessed by clicking the Folder Icon in the DataLocker Control Panel.

Formatting The Sentry

Sentry K300 Managed User Guide

K300) and click Continue.

DataLocker Control Panel

for more