DataLocker Sentry K300 검토자 매뉴얼 - 페이지 3

{카테고리_이름} DataLocker Sentry K300에 대한 검토자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DataLocker Sentry K300 10 페이지. Encrypted keypad mssd with oled screen
DataLocker Sentry K300에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지), 배포 매뉴얼 (10 페이지)

페이지 인쇄

Setup and Installation

Getting started with the K300 is easy:
1
POWER ON SENTRY K300
Hold
key for 3 seconds (If the battery is low or dead, charge by plugging into a
certied USB port for 30 min.)
2
ENTER PASSWORD​
Selected character is shown in the white circle on the screen
Press key repeatedly within one second to switch characters
Press
to delete and
*​
Enter default password ​ 1 234567 ​ o n first use (default password can be used 3 times
before it MUST be changed)
3
CONNECT AND WORK
Before connecting, navigate the menu by pressing
From the connect screen, plug in to any system that utilizes USB Mass Storage.
Select connection method:
Windows: Start > This PC > Devices > Sentry K300
Mac: Finder > Devices > Sentry K300
Refer to the full user manual for connecting to other systems.
https://media.datalocker.com/manuals/sentry/DataLocker_K300_User_Guide.pdf
Before removing, safely eject the device to securely lock the drive.
Formatting The Sentry K300
The ​ S entry K300 is formatted as NTFS from the factory​ but can be reformatted to any file
system to accommodate a different operating system or to remove file size restrictions. Not all
file systems are available on all operating systems. Recommended file systems:
● FAT32
Pros: Cross-platform compatible (Windows, macOS, and Linux)
Cons: Limited individual file size of 4GB
● NTFS
Pros: No file size limitations
Cons: Limited cross-platform compatibility - Windows, macOS (read-only),
and Linux (read-only)
● exFAT
Pros: No file size limitations
Cons: Not supported by legacy operating systems
Note:​ Reformatting your Sentry K300 drive will erase all your files but will not erase your device
password and settings. This should not be used as a method of securely erasing files. To
securely erase your files, perform a Zeroize function.
* ​
WHEN PROMPTED
to enter
or