DataLocker Sentry K300 검토자 매뉴얼 - 페이지 4

{카테고리_이름} DataLocker Sentry K300에 대한 검토자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DataLocker Sentry K300 10 페이지. Encrypted keypad mssd with oled screen
DataLocker Sentry K300에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지), 배포 매뉴얼 (10 페이지)

페이지 인쇄

Windows 10 Users

By default, Windows 10 attempts to shut off USB devices after a set period of inactivity. If the

Sentry K300 is put into this low power state, the drive will automatically lock the drive and

require reauthentication. To disable this feature of Windows, you must disable Windows 10

Power Save by following the steps below.

Note: You will need to complete the following steps once for each drive plugged into your

computer.

1. Log in as a local administrator on your computer.

Note: If you are not an

administrator you will receive a

warning indicating you won't be

able to make changes when you

open Device Manager. Please

contact your administrator for

further assistance.

2. Unlock your Sentry K300 device and plug it into the computer.

3. Open D evice Manager (Click the windows button and type "device manager").

4. Click on the arrow next to Universal Serial Bus controllers.

5. Right click on U SB Mass Storage Device .

6. Click P roperties .

7. Go to the P ower Management tab.

8. Uncheck "Allow the computer to turn off this device to save power".

9. Click O K .