DataLocker Sentry K300 Manuel du réviseur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel du réviseur pour {nom_de_la_catégorie} DataLocker Sentry K300. DataLocker Sentry K300 10 pages. Encrypted keypad mssd with oled screen
Également pour DataLocker Sentry K300 : Manuel de l'utilisateur (19 pages), Manuel de déploiement (10 pages)

Imprimer la page

Windows 10 Users

By default, Windows 10 attempts to shut off USB devices after a set period of inactivity. If the

Sentry K300 is put into this low power state, the drive will automatically lock the drive and

require reauthentication. To disable this feature of Windows, you must disable Windows 10

Power Save by following the steps below.

Note: You will need to complete the following steps once for each drive plugged into your

computer.

1. Log in as a local administrator on your computer.

Note: If you are not an

administrator you will receive a

warning indicating you won't be

able to make changes when you

open Device Manager. Please

contact your administrator for

further assistance.

2. Unlock your Sentry K300 device and plug it into the computer.

3. Open D evice Manager (Click the windows button and type "device manager").

4. Click on the arrow next to Universal Serial Bus controllers.

5. Right click on U SB Mass Storage Device .

6. Click P roperties .

7. Go to the P ower Management tab.

8. Uncheck "Allow the computer to turn off this device to save power".

9. Click O K .