Elsner 70157 기술 사양 및 설치 지침 - 페이지 8

{카테고리_이름} Elsner 70157에 대한 기술 사양 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Elsner 70157 9 페이지. Pyranometer

2.3.4. PCB layout

2.3.5. Mounting the sensor

Close the housing by putting the cover back over the bottom part. The cover must snap

in on the left and right with a definite "click".

Pyranometer KNX PY • Status: 08.03.2016 • Technical changes reserved. Errors reserved.

Fig. 13

Make sure the cover and bottom part are

properly snapped together! This picture is

looking at the closed sensor from under-

neath.

Fastening

Installation and commissioning

Fig. 12

KNX clamp +/-

Programming LED

Programming pushbutton for

the teach-in of the device