Elsner 70157 Technical Specifications And Installation Instructions - Page 8
Browse online or download pdf Technical Specifications And Installation Instructions for Measuring Instruments Elsner 70157. Elsner 70157 9 pages. Pyranometer
Print Page
2.3.4. PCB layout
2.3.5. Mounting the sensor
Close the housing by putting the cover back over the bottom part. The cover must snap
in on the left and right with a definite "click".
Pyranometer KNX PY • Status: 08.03.2016 • Technical changes reserved. Errors reserved.
10
Fig. 13
Make sure the cover and bottom part are
properly snapped together! This picture is
looking at the closed sensor from under-
neath.
Fastening
Installation and commissioning
Fig. 12
1
KNX clamp +/-
2
Programming LED
3
Programming pushbutton for
the teach-in of the device
1
2
3