Datalogic Gryphon D100 빠른 참조 - 페이지 8

{카테고리_이름} Datalogic Gryphon D100에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Datalogic Gryphon D100 20 페이지.
Datalogic Gryphon D100에 대해서도 마찬가지입니다: 참조 매뉴얼 (20 페이지)

페이지 인쇄

WEDGE DEFAULT SETTINGS

DATA FORMAT

code length not transmitted, no header, terminator =

ENTER, character replacement disabled

PEN EMULATION DEFAULT SETTINGS

interpret mode, conversion to code 39 disabled, output level

normal, idle level normal, minimum output pulse 600 µs,

overflow medium, inter-block delay disabled

POWER SAVE

scan rate 270 scans/s, standby disabled, sleep state

disabled, enter sleep timeout 0.6 sec

READING PARAMETERS

operating mode hand-held, trigger type = hardware, trigger

signal = level, no trigger timeout, Flash On = 1 sec, Flash

Off = .6 sec, one read per cycle, safety time .5 sec, beeper

intensity high, tone 2, beeper type monotone, beeper length

short, good read spot duration medium

DECODING PARAMETERS

ink spread enabled, overflow control enabled, interdigit

control enabled, Puzzle Solver™ disabled, decoding

safety = one read

CODE SELECTION

Enabled codes

•

Code PDF417 (only GRYPHON™ D200)

•

EAN 8/EAN 13 / UPC A/UPC E without ADD ON

check digit transmitted, no conversions

•

Interleaved 2/5

check digit control and transmission, variable length

code; 4-99 characters

•

Standard Code 39

no check digit control, variable length code; 1-99

characters

•

Code 128

variable length code; 1-99 characters

Disabled codes

EAN

pharmaceutical codes, Codablock-A, Codablock-F

Standard and EAN, MSI, Plessey, Telepen, Delta

IBM, Code 11, Code 16K, Code 49

ADVANCED FORMATTING PARAMETERS

concatenation disabled, no advanced formats defined

: code identifier disabled, no field adjustment,

128,

ISBT128,

Code

93,

Codabar,