elsner elektronik 20559 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} elsner elektronik 20559에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. elsner elektronik 20559 2 페이지. Indoor sensor

페이지 인쇄

2.3. Assembly of the sensor

First of all fit the windproof socket with connection. Also seal inlet pipes to avoid in-

filtration.

Screw the base plate onto the socket and position the frame of the switching pro-

gramme. Connect the power supply +/- to the connector terminals provided for this

purpose on the sensor board.

Pin the housing with the notches on to the metal frame, so that device and frame are

fixed. The device has to be inserted such that the connecting terminal faces up (see

Fig. 2). This is necessary for a correct temperature measurement.

Commissioning

Never expose the device to water (e.g. rain) or dust. This can damage the electro-

nics. You must not exceed a relative humidity of 95%. Avoid condensation.

Disposal

After use, the device must be disposed of in accordance with the legal regulations.

Do not dispose of it with the household waste!

Indoor Sensor WG AQS/TH gl • Version: 25.11.2021 • Technical changes and errors excepted. • Elsner Elektronik GmbH • Sohlengrund 16 • 75395 Ostelsheim • Germany • www.elsner-elektronik.de • Technical Service: +49 (0) 7033 / 30945-250

Indoor Sensor WG AQS/TH gl