elsner elektronik 20559 Manual de início rápido - Página 2
Procurar online ou descarregar pdf Manual de início rápido para Acessórios elsner elektronik 20559. elsner elektronik 20559 2 páginas. Indoor sensor
Imprimir página
2.3. Assembly of the sensor
First of all fit the windproof socket with connection. Also seal inlet pipes to avoid in-
filtration.
Screw the base plate onto the socket and position the frame of the switching pro-
gramme. Connect the power supply +/- to the connector terminals provided for this
purpose on the sensor board.
Pin the housing with the notches on to the metal frame, so that device and frame are
fixed. The device has to be inserted such that the connecting terminal faces up (see
Fig. 2). This is necessary for a correct temperature measurement.
3.
Commissioning
Never expose the device to water (e.g. rain) or dust. This can damage the electro-
nics. You must not exceed a relative humidity of 95%. Avoid condensation.
4.
Disposal
After use, the device must be disposed of in accordance with the legal regulations.
Do not dispose of it with the household waste!
Indoor Sensor WG AQS/TH gl • Version: 25.11.2021 • Technical changes and errors excepted. • Elsner Elektronik GmbH • Sohlengrund 16 • 75395 Ostelsheim • Germany • www.elsner-elektronik.de • Technical Service: +49 (0) 7033 / 30945-250
Indoor Sensor WG AQS/TH gl
2