Dust Free CARBON 13052 설치 및 운영 매뉴얼 - 페이지 4

{카테고리_이름} Dust Free CARBON 13052에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dust Free CARBON 13052 6 페이지.

페이지 인쇄

DUST FREE

CARBON AIR PURIFIER INSTALLATION & OPERATION MANUAL

METAL DUCTWORK INSTALLATION

• Locate a suitable area of the duct for

installation. Minimum 8" area.

• If needed, cut away insulation to expose

metal duct.

• Mark location for 5" opening using the

included mounting plate as a template.

• Cut opening for the device.

• Remove the backing from the mounting

plate gasket, center mounting plate over

opening, and press onto the duct. The

adhesive gasket will hold the mounting

plate in place.

• Secure the mounting plate using self-

tapping screws.

• Insert device into opening and secure

with knurled nuts.

• Connect to proper power and test

operation. The operation indicator light on

the face of the device should be on.

MAINTENANCE/UV LAMP INDICATOR

For optimal performance, replace the

device core each year and the UV-C lamp

every 2 years, even if the UV-C lamp

appears to be operating normally.

The operation indicator on the face of

the device should glow during normal

operation. If the indicator does not glow

and the unit has power, the device core

should be replaced.

WARNING

Electric Shock Hazard.

Can cause injury or death.

Electrical wiring of the unit to the

HVAC system should be done by a

licensed HVAC technician or

electrical installer.

Fig. 2 Cut opening in duct, attach mounting plate, and

install device.

FIBERGLASS DUCTWORK NOTE

For fiberglass ductwork installations use 3"

toggle bolts to attach mounting plate.

Operation Indicator

Fig. 3 Operation indicator.

WARNING

UV Light Hazard.

Can cause serious eye and skin

damage.

Do not look at UV-C light. Wear UV-C

eye and skin protection