Dust Free CARBON 13052 Manual de instalação e operação - Página 4
Procurar online ou descarregar pdf Manual de instalação e operação para Filtro de ar Dust Free CARBON 13052. Dust Free CARBON 13052 6 páginas.
Imprimir páginaDUST FREE
CARBON AIR PURIFIER INSTALLATION & OPERATION MANUAL
®
METAL DUCTWORK INSTALLATION
• Locate a suitable area of the duct for
installation. Minimum 8" area.
• If needed, cut away insulation to expose
metal duct.
• Mark location for 5" opening using the
included mounting plate as a template.
• Cut opening for the device.
• Remove the backing from the mounting
plate gasket, center mounting plate over
opening, and press onto the duct. The
adhesive gasket will hold the mounting
plate in place.
• Secure the mounting plate using self-
tapping screws.
• Insert device into opening and secure
with knurled nuts.
• Connect to proper power and test
operation. The operation indicator light on
the face of the device should be on.
MAINTENANCE/UV LAMP INDICATOR
For optimal performance, replace the
device core each year and the UV-C lamp
every 2 years, even if the UV-C lamp
appears to be operating normally.
The operation indicator on the face of
the device should glow during normal
operation. If the indicator does not glow
and the unit has power, the device core
should be replaced.
WARNING
Electric Shock Hazard.
Can cause injury or death.
Electrical wiring of the unit to the
HVAC system should be done by a
licensed HVAC technician or
electrical installer.
Fig. 2 Cut opening in duct, attach mounting plate, and
install device.
FIBERGLASS DUCTWORK NOTE
For fiberglass ductwork installations use 3"
toggle bolts to attach mounting plate.
Operation Indicator
Fig. 3 Operation indicator.
WARNING
UV Light Hazard.
Can cause serious eye and skin
damage.
Do not look at UV-C light. Wear UV-C
eye and skin protection