Dust Free MicroPure 9" with MX4 소유자 매뉴얼 - 페이지 9

{카테고리_이름} Dust Free MicroPure 9" with MX4에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dust Free MicroPure 9" with MX4 12 페이지. Total home active air purifier

페이지 인쇄

FIBERGLASS DUCTWORK INSTALLATION

5. Insert (4) 2" Threaded bolts into screw holes

at corners of mounting plate. Attach (4) toggle

bolt anchors to ends of threaded bolts.

7. Insert (4) toggle bolts into 3/8" holes in duct.

Be sure toggle anchors open after inserting.

9. Insert unit into opening. Be sure the air will

pass though the MX4™ core.

11. Plug unit into working power receptacle or

hardwire to proper power.

Hard wiring unit into HVAC system

should be done by a licensed

HVAC installer or electrical

contractor.

(CONTINUED)

Stud

6. Remove backing from mounting plate

adhesive gasket.

8. Center large opening in mounting plate over

3.5" opening in duct and press plate to duct.

The adhesive gasket will hold the mounting

plate into place.

Tighten toggle bolts - DO NOT OVERTIGHTEN.

10. Secure the unit to the mounting plate with

(4) hex nuts.