CB-tec neocube-o 운영 매뉴얼 - 페이지 15

{카테고리_이름} CB-tec neocube-o에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CB-tec neocube-o 20 페이지.

4. SAFETY INSTRUCTIONS

Please read these safety instructions carefully before operating the gas fireplace! If the information from the instructions is not

strictly followed, fire or explosion could result, which could lead to property damage, serious bodily injury or even death.

WARNING: Umproper installation, adjustments, changes, care or maintenance can result in injury or damage. Consult the user's

manual which is included in this delivery. If you have questions or would like additional information, please contact an authorised

gas fitter. When igniting the burner, make sure that the valve of the gas cylinder is opened fully.

WARNING: The unit is intended exclusively for outdoor use. It is not suited for installation in buildings, garages or closed structures

or in/on vehicles or boats.

WARNING: This gas fireplace should never be used underneath a combustible structure or combustible materials and should never

be placed in the immediate vicinity of other combustible materials.

WARNING: The installation and maintenance of the unit should be conducted by a recognised gas fitter. Local regulations should be

followed in the process. Improper installation, adjustment, alteration, care or maintenance can result in damage or injury.

WARNING: Follow all the instructions (provided in the manual) regarding gas leak detection before operating the unit. Never try to

loosen the gas fitting when the unit is in use.

WARNING: Do not use or store petrol or other flammable vapours or liquids near this or other units.

WHAT YOU SHOULD DO IF YOU SMELL GAS: Close the gas supply, extinguish any fires, and then contact your gas fitter and follow

his instructions. If you cannot reach your gas fitter, you should contact the fire brigade.

WARNING: This unit may not be used on a flammable surface, such as a wood table.

WARNING: Operation and transport may be carried out only with the four secured cotter pins. The cotter pins are included with the

unit and are to be inserted in the gas cylinder compartment in the perforated steel plates of the upper part of the glass (Fig. 2a /b).

Fig. 2a

Fig. 2b

neocube-o | 15