CB2 chill 조립 설명서 - 페이지 2

{카테고리_이름} CB2 chill에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CB2 chill 6 페이지. Large media console
CB2 chill에 대해서도 마찬가지입니다: 조립 지침 (4 페이지)

페이지 인쇄
CB2 chill 조립 설명서
chill
MEDIA CONSOLE
NOTE: Do not over
tighten the cam
screws
middle
A
panel
A. Insert 2 cam screws, 2 wood dowels and 4
cams into middle panel as shown. Secure, but do
not over tighten, cam screws with a phillips head
screwdriver. Make sure arrows on each cam point
toward nearest edge with holes.
B. Insert 4 cam screws, 6 wood dowels and 2
1
cams into left and right side panels as shown.
A
top panel
bottom
B
panel
A. Insert 8 wood dowels and 8 cam screws into
top panel as shown.
3
B. Insert 4 cams into bottom panel as shown.
Made in Vietnam - r09
NOTE: Make sure arrows
on each cam point toward
nearest edge with holes
left and right
B
side panels
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
top partition
bottom
partition
A. Insert 2 wood dowels and 2 cams into top
partitions as shown.
B. Insert 2 dowels and 2 cams into bottom
2
partition as shown.
NOTE: Do not over
tighten the bolts
top partition
Fit dowels of top partitions into corresponding
holes of middle panel as shown. Secure middle
panel with 4 bolts, 4 spring washers, and 4 flat
washers, using a phillips head screwdriver. Do
4
not over tighten the bolts.
middle panel
top partition
Page 2 of 6