CB2 Finn Lounger 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} CB2 Finn Lounger에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CB2 Finn Lounger 3 페이지.

finn
LOUNGER
A. Repeat steps 2-4 for right
side frame. At this point, fully
tighten all bolts and screws.
B. Adhere 1 pad onto each foot
of assembled unit as shown.
Press firmly to secure.
5
slat roll
Lay slat roll onto assembled unit with fabric straps
facing down. Secure with 8 screws using a
6
screwdriver as shown.
Made in China - r08
B
pad
NOTE: Make sure straps
are facing down as shown.
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Place matress onto assembled unit.
7
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer. Wipe
up spots and spilled immediately. Please keep Finn
Lounger out of direct sunlight to prevent the matress
cover from fading.
A
right side
frame
Page 3 of 3