CB2 Finn Lounger Quick Start Manual - Page 3
Browse online or download pdf Quick Start Manual for Indoor Furnishing CB2 Finn Lounger. CB2 Finn Lounger 3 pages.
finn
LOUNGER
A. Repeat steps 2-4 for right
side frame. At this point, fully
tighten all bolts and screws.
B. Adhere 1 pad onto each foot
of assembled unit as shown.
Press firmly to secure.
5
slat roll
Lay slat roll onto assembled unit with fabric straps
facing down. Secure with 8 screws using a
6
screwdriver as shown.
Made in China - r08
B
pad
NOTE: Make sure straps
are facing down as shown.
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Place matress onto assembled unit.
7
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer. Wipe
up spots and spilled immediately. Please keep Finn
Lounger out of direct sunlight to prevent the matress
cover from fading.
A
right side
frame
Page 3 of 3