CB2 HYDE 조립 지침 - 페이지 3
{카테고리_이름} CB2 HYDE에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. CB2 HYDE 5 페이지. Square open wall ccabinet
CB2 HYDE에 대해서도 마찬가지입니다: 조립 지침 (4 페이지), 조립 지침 (4 페이지)
페이지 인쇄hyde
SQUARE WALL CABINET
Fit back panel into corresponding grooves of
4
assembly as shown.
Refer to Hinge Adjustment
diagram for adjusting the
alignment of the door hinges.
NOTE: Do not over tighten
the screws
Fit door hinges of door panel into corresponding
hinge plate of assembly as shown. Secure each
hinge with 4 small screws as shown, using a
6
screwdriver. Do not over tighten the bolts.
Made in Vietnam - r04
Customer Service 800.606.6252 | Latest instructions available on www.cb2.com
A
B
A. Insert 6 wood dowels and 4 cam screws into
bottom panel as shown.
B. Insert 2 cams into each side panel as shown.
C. Fit dowels of bottom panel into corresponding
5
holes of assembly. Secure all cams.
Position assembly on left side as shown. Attach
arm hinge to right side panel with 3 hinge screws
as shown. Secure, but do not over tighten, screws
7
with a screwdriver.
C
Page 3 of 5